Last Updated: August 2026 | Reading Time: 12 minutes
Introduction
Sodium sulfide provides ultra-low heavy metal discharge levels through sulfide precipitation.
Key Properties & Specifications
| Parameter | Specification | Test Method |
|---|---|---|
| Appearance | Yellow/White powder | Visual |
| Active Content | Varies by grade | Titration |
| pH (1% solution) | 3.0-5.0 | pH meter |
| Insoluble matter | ≤0.5% | Gravimetric |
Applications Across Industries
| Industry | Primary Use | Dosage |
|---|---|---|
| Municipal Water | Coagulation | 20-80 mg/L |
| Textile | Color removal | 100-300 mg/L |
| Mining | TSS removal | 50-200 mg/L |
| Paper & Pulp | Retention | 100-400 mg/L |
| Food | Solids removal | 50-200 mg/L |
How to Select the Right Grade
- Water quality: pH, turbidity, COD, TSS
- Treatment stage: Primary vs polishing
- Industry: Different wastewater characteristics
- Discharge standards: Local regulatory limits
- Cost optimization: Balance cost vs performance
Always conduct a jar test to determine optimal product and dosage.
Chemical Dosing Guide
| Stage | Chemical | Dosage | pH | Efficiency |
|---|---|---|---|---|
| Coagulation | PAC 30% | 50-300 mg/L | 5.5-8.0 | 30-55% COD |
| Coagulation | PFS | 30-200 mg/L | 4.5-8.0 | 40-60% COD |
| Flocculation | PAM | 0.5-5 mg/L | 6-9 | Improves settling |
| Adsorption | Carbon | 50-500 mg/L | 5-9 | 20-80% COD |
Cost Analysis
| Method | Capital | Operating | Best For |
|---|---|---|---|
| Coagulation | $50-150 | $0.10-0.30 | Suspended solids |
| Biological | $100-250 | $0.05-0.20 | Biodegradable COD |
| Fenton AOP | $80-200 | $0.30-1.00 | Refractory COD |
| Activated Carbon | $50-150 | $0.20-0.80 | Polishing |
FAQ
What is sodium sulfide precipitation?
sodium sulfide precipitation is a water treatment chemical used for coagulation, flocculation, or adsorption in wastewater and drinking water treatment. It effectively removes suspended solids, colloidal particles, and dissolved organic compounds through physicochemical processes.
How does sodium sulfide precipitation work in water treatment?
sodium sulfide precipitation works by destabilizing colloidal particles through charge neutralization, forming flocs through bridging and sweep coagulation, and facilitating removal through sedimentation or flotation. The mechanism depends on the specific chemical type and water quality conditions.
What dosage of sodium sulfide precipitation should I use?
Typical dosage: 20-80 mg/L for drinking water, 50-300 mg/L for industrial wastewater, 0.5-5 mg/L for PAM. Actual dosage must be determined by jar testing. Contact HydroChemix for free technical guidance.
How to choose the right grade of sodium sulfide precipitation?
Selection depends on water pH, turbidity, COD level, industry, and discharge standards. Use our Chemical Selection Tool or request a free sample for jar testing.
Need Expert Help?
HydroChemix provides free technical consultation, jar testing support, and free samples. Our engineers help you select the right chemical and optimize treatment.
Request Free Sample | Chemical Selection Tool | Request Quote